Kenwood NEXEDGE NX-200 Function Reference page 242
Hide thumbs
Also See for NEXEDGE NX-200:
- Service manual (172 pages) ,
- Instruction manual (136 pages) ,
- Brochure (12 pages)
Table of Contents
Advertisement
9 NXDN TRUNKING SYSTEM
9.5 Making an Individual Call (Transmission Trunked)
•
If the transceiver receives a response message from the system indicating a busy state of the receiving
transceiver:
The Busy Tone 2 sounds from the transceiver and then the transceiver will terminate the transmission.
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
•
If the transceiver receives a response message from the system, indicating that no traffic channel is
available:
The System Busy Tone sounds from the transceiver and then the transceiver will terminate the transmission.
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
•
If the transceiver receives a response message from the system indicating no response from the receiving
transceiver:
The No Reply Tone sounds from the transceiver and then the transceiver will terminate the transmission.
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
•
If the transceiver receives a message from the system, such as a service invalid message:
The Call Invalid Tone sounds from the transceiver and then the transceiver will terminate the transmission.
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
•
If the transceiver does not receive any message from the system:
The Call Fail Tone sounds from the transceiver and then the transceiver will terminate the transmission.
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
FUNC (K)/Ver 4.00
Mobile
Mobile
Mobile
Mobile
Mobile
CONTENTS
INDEX
208
Advertisement
Chapters
Table of Contents
