Kenwood NEXEDGE NX-200 Function Reference page 297

10 ANALOG CONVENTIONAL SYSTEM
10.2 Using the Signaling
Operating the Transceiver
 Monitor key
1
Press the Monitor
The " " icon appears. For NX-200S/ NX-300S, Key Beep A
sounds from the transceiver.
On a channel where QT/DQT Decode is configured, the QT tone
or DQT code is deactivated and the received signal will be
audible upon receipt of a carrier.
2
Press the Monitor
The " " icon disappears. For NX-200S/ NX-300S, Key Beep B
sounds from the transceiver.
A channel where QT/DQT Decode is configured resumes
Signaling Squelch.
 Monitor Momentary key
1
Press and hold the
The " " icon appears. On a channel where QT/DQT Decode is
configured, the QT tone or DQT code is deactivated and the
received signal will be audible upon receipt of a carrier.
FUNC (K)/Ver 4.00
key while Monitor is disabled.
key while Monitor is enabled.
Monitor Momentary key.
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
CONTENTS INDEX 263