Nx-210/ Nx-410/ Nx-411 - Kenwood NEXEDGE NX-200 Function Reference

1 FUNCTIONS AND PANEL LAYOUT

1.2 NX-210/ NX-410/ NX-411

1.2 NX-210/ NX-410/ NX-411
1 Antenna
Selector
2
The zone, channel, or GID can be changed. In
NX-210/ NX-410/ NX-411, a stopper cannot be
installed to the Selector.
Power Switch/ Volume Control
3
The transceiver can be turned ON by rotating the
Power switch. The volume level of the speaker sound
can be adjusted.
AUX Key
4
The preassigned function will be activated or will be
changed to the active state.
Transmit LED/ Busy LED
5
These LEDs light when the transceiver transmits or
receives a signal.
Side 1 Key
8
The preassigned function will be activated or will be
changed to the active state.
PTT Switch
7
Pressing the PTT switch allows a user to transmit.
Speaker
8
The received audio and Alert Tone sound from the
speaker.
LCD
9
The channel number and the transceiver's status
appear on this display. The LCD display format is the
same as NX-200/ NX-300.
FUNC (K)/Ver 4.00
1
6
7
9
10
11
14
16
Figure 1-2 NX-210/ NX-410/ NX-411 Front View
10
11
12
13
2
3
4
5
17
8
12
13
15
Side 2 Key
The preassigned function will be activated or will be
changed to the active state.
[ ] (Menu) Key
The preassigned function will be activated or will be
changed to the active state. The [
described as the Menu ([
relevant in-depth manuals.
The default of the [ ] (Menu) key is the Menu
function. If the configuration is changed using
KPG-111D/ DN, a newly configured function will be
activated. Unless the Menu function is reassigned to
the [ ] (Menu) key, Menu Mode cannot be activated
even if the[ ](Menu) key is pressed. Refer to
Operations for Each Mode on page 531
how the transceiver behaves when the [
key is pressed in Menu Mode.
[ ]/ [ ] (Up/ Down) Key
The zone, channel, or GID can be changed. The
preassigned function will be activated or will be
changed to the active state. The [
(Down) keys are described as the Up and Down keys
in this manual and relevant in-depth manuals.
[ ] (Back) Key
The preassigned function will be activated or will be
changed to the active state. The [
described as the Back key in this manual and
relevant in-depth manuals.
CONTENTS
] (Menu) key is
]) key in this manual and
Key
for details on
] (Menu)
] (Up) and [ ]
] (Back) key is
INDEX 3