Kenwood NEXEDGE NX-200 Function Reference page 22

CONTENTS
Off-hook Site Roaming (Mobile Only)............ 178
Revert Channel Display................................. 178
8.15 Sending GPS Data..................................... 179
Transmission Method of GPS Data ............... 179
The ID of the Target Transceiver
(Base ID) ....................................................... 179
Sending GPS Data Automatically at Certain
Intervals (GPS Report Mode) ........................ 180
Sending GPS Data According to the Request
from the Base Station
(GPS Report Mode)....................................... 180
Sending GPS Data Manually by Using a Key
(Send the GPS Data)..................................... 181
Sending GPS Data Together With Voice
Communications (GPS Combination)............ 181
Sending GPS Data Together With Status Call
(GPS Combination) ....................................... 181
Sending GPS Data Together With Emergency
Call (GPS Combination) ................................ 181
Sending GPS Data during Voice
Communications (Data with Voice) ............... 182
GPS Functions .............................................. 182
8.16 Receiving GPS Data .................................. 183
Map Header................................................... 183
GPS Position Display .................................... 184
8.17 Disabling the Transceiver Capability by
Remote Control (Stun/ Kill) ........................ 184
8.18 Actions for Other Transceivers................... 185
Monitoring the Situation Around Another
Transceiver by Remote Control
(Remote Monitor)........................................... 185
Checking Whether Another Transceiver is in
Operation (Radio Check)............................... 186
9 NXDN TRUNKING SYSTEM ................ 187
9.1 Initiating Voice Communications
(Basic Transmission and Reception) ......... 189
About Own ID ................................................ 189
About Trunking Type ..................................... 189
Control Channel Acquisition and
Registration ................................................... 189
Receiving....................................................... 190
Auto Reset Timer........................................... 190
Selective Call Alert LED ................................ 190
Over-the-Air Alias .......................................... 191
Receiving a High-priority Call
(Priority Monitor ID) ....................................... 191
Participating in an On-going Voice Call Midway
Through the Call (Late Entry) ........................ 193
Searching Whether the Transceiver Receives
a Call (Scan).................................................. 193
Transmitting................................................... 193
Restricting the Continuous Transmission
Duration (Time-out Timer) ............................. 193
9.2 Control Channel Hunt................................. 194
System Search Policy.................................... 196
Retaining the Site Information Used When
the Transceiver Is Turned OFF
(Last Control Channel) .................................. 196
FUNC (K)/Ver 4.00
Starting the Control Channel Hunt Manually
(Forced Search)............................................. 197
9.3 Registration in an NXDN Trunking
System ....................................................... 199
Registering the Own Unit ID in a System
(Registration) ................................................. 199
Registering the Group ID Used by the
Own Transceiver in a System
(Group-registration) ....................................... 200
Clearing the Registration Information from a
System (Registration Clear) .......................... 202
9.4 Using NXDN ID to Initiate a Selective
Call ............................................................. 203
Available Calls ............................................... 203
Trunking Type................................................ 203
Transition for Each Mode .............................. 204
9.5 Making an Individual Call
(Transmission Trunked) ............................. 204
Initiating an Individual Call
(Transmission Trunked)................................. 204
Receiving an Individual Call
(Transmission Trunked)................................. 209
Unit ID List ..................................................... 211
Notifying the User with a Tone That a
Call Request Has Been Initiated
(Call Request Tone)/
Notifying the User with a Tone That a
Call Request Is in Progress
(Call Processing Tone) .................................. 212
Restricting IDs for Which the Transceiver Can
Initiate a Call (Unit ID Encode Block) ............ 213
Sending the Received Unit ID from the
Communication Port
(Unit ID Serial Output) ................................... 213
9.6 Initiating an Individual Call After Ensuring
That the Target Party Is Available for
Communications
(Message Trunked (Enhanced)) ................ 214
Initiating an Individual Call
(Message Trunked (Enhanced)).................... 214
Receiving an Individual Call
(Message Trunked (Enhanced)).................... 217
Sending an Acknowledgment Automatically
(Automatic Response) ................................... 220
9.7 Making a Group Call
(Transmission Trunked) ............................. 220
Initiating a Group Call
(Transmission Trunked)................................. 220
Receiving a Group Call
(Transmission Trunked)................................. 222
Display When the Transceiver Receives a
Group Call (Group Call Display Type) ........... 223
Preventing the Functions Working with
Group Call Reception from Activating
(Call Alert Inhibit (Group Calls Only)) ............ 223
Preventing Reception of a Group Call While
the Transceiver Is Receiving an Individual Call
(Ignore Group Call during Individual Call) ..... 224
PTT Hold Inhibit............................................. 224
INDEX xx