Kenwood NEXEDGE NX-200 Function Reference page 104

4 TRANSMISSION/ RECEPTION
4.5 Displaying the Signal Strength Level (RSSI Level) (Maintenance Display)
 For an NXDN Trunking system
1
Press the Maintenance
The channel number and RSSI level configured for Frequency
Table appear on the first row of the main display. The site number
appears on the second row of the main display.
2
Press the Up or Down
The channel number configured for Frequency Table switches. If
the selected channel number satisfies conditions to hunt for a
control channel, the channel number or site name appears on the
second row of the main display.
If the selected channel number does not satisfy conditions to hunt
for a control channel, the transceiver will be in the Out of Service
state, and then the RSSI icon will blink. In this case, the site
number or site name does not appear.
NX-700/ NX-700H/ NX-800/ NX-800H/ NX-900/ NX-901
 For other than NXDN Trunking system
1
Press the Maintenance
The transceiver enters Maintenance Display Mode and then the
RSSI level appears. Display of the RSSI level is renewed every
500 ms.
FUNC (K)/Ver 4.00
key.
key.
key.
• If the RSSI level is -96 dBm
• If the RSSI level is less than -120 dBm
• If the RSSI level is more than -80 dBm
CONTENTS INDEX 70