Kenwood NEXEDGE NX-200 Function Reference page 544

APPENDIX
Available Functions for the PF Keys
The following functions can be assigned to the PF keys of the transceiver using KPG-111D/ DN.
Function Name
None
2-tone
Auto Reply Message
Auto Telephone
Autodial
Autodial Programming
AUX (Portable only)
AUX A
(Mobile only)
AUX B
(Mobile only)
Backlight (NX-200/ NX-210/
NX-300/ NX-410/ NX-411
only)
FUNC (K)/Ver 4.00
Table 1-1 Available Functions for the PF Keys
No function is activated.
Enters the 2-tone Mode. In 2-tone Mode, a 2-tone code stored in the 2-
tone Encode List can be selected and sent. (Refer to
Initiate a Selective Call on page
Note
This function cannot be assigned for NX-200S/ NX-300S/ NX-410/
NX-411/ NX-900/ NX-901.
Toggles Auto Reply Message between enabled and disabled. (Refer to
Recording Received Audio When a User Is Away from the Transceiver
(Auto Reply Message) on page
Note
For NX-200S/ NX-300S, this function cannot be assigned.
Searches for and connects to an available LTR Trunking system to
connect to a telephone line. (Refer to
Telephone Line (Auto Telephone Search) on page
Enters Autodial Mode. In Autodial Mode, the transceiver can transmit by
a user selecting DTMF codes from the Autodial List or directly entering a
DTMF code. (Refer to 14 DTMF on page
Note
For NX-200S/ NX-300S, this function cannot be assigned.
Enters Autodial Programming Mode. In Autodial Programming Mode, the
data configured for Autodial List can be added, changed, or deleted.
(Refer to Editing the Autodial List with the Transceiver (Autodial
Programming) on page 378.)
Note
For NX-200S/ NX-300S, this function cannot be assigned.
Alternates the status of the AUX Output port. The AUX Output port status
is changed to inactive if the status is active; or, the AUX Output port
status is changed to active if the status is inactive. Status of the AUX port
can be changed by pressing the AUX key, hence an external device
connected to the AUX port can be controlled.
Alternates the status of the AUX A Output port. The AUX A Output port
status is changed to inactive if the status is active; or, the AUX A Output
port status is changed to active if the status is inactive. Status of the AUX
A port can be changed by pressing the AUX A key, hence an external
device connected to the AUX A port can be controlled.
Alternates the status of the AUX B Output port. The AUX B Output port
status is changed to inactive if the status is active; or, the AUX B Output
port status is changed to active if the status is inactive. Status of the AUX
B port can be changed by pressing the AUX B key, hence an external
device connected to the AUX B port can be controlled.
The backlight of the transceiver lights. (Refer to
(Backlight) (NX-200/ NX-210/ NX-300/ NX-410/ NX-411 Only) on page
74.)
Description
10.4 Using 2-tone to
269.)
463.)
Automatically Connecting to a
291.)
359.)
5.4 Lighting the Backlight
Available System
-
Analog Conventional System
ALL
LTR Trunking System
ALL
ALL
ALL
ALL
ALL
ALL
CONTENTS INDEX
*1
510