Kenwood NEXEDGE NX-200 Function Reference page 318

11 LTR TRUNKING SYSTEM
11.1 Using the LTR ID for Basic Communications
Configuration using KPG-111D/ DN
• Configuring the Talk Around (
• Assigning functions to the PF keys on the transceiver (
Talk Around Busy Channel Lockout
Talk Around Busy Channel Lockout automatically restricts a transmission so as not to interfere with other communications.
The transceiver directly communicates with the target transceiver using Talk Around if the distance to a home repeater is
too great. If an attempt is made to use a channel already used by other groups at that time, the transceiver automatically
restricts its own transmission.
If Talk Around Busy Channel Lockout is enabled and if the PTT switch is pressed, the transceiver cannot transmit with
"BUSY" appearing on the main display and the Warning Tone A sounding at the same time. The Warning Tone A sounds
until the PTT switch is released.
Configuration using KPG-111D/ DN
Configuring the Talk Around Busy Channel Lockout to be enabled or disabled (
Channel Lockout)
Talk Around Key
Talk Around Key is the function to permit or inhibit Talk Around key operation in an LTR Trunking system.
Talk Around Key can be disabled to prevent a user from using Talk Around.
Configuration using KPG-111D/ DN
Configuring the Talk Around Key (
FUNC (K)/Ver 4.00
See FPRG 8.7.13 Talk Around)
See
Repeater
Figure 11-4 Talk Around Busy Channel Lockout
See FPRG 8.6.16 Talk Around Key)
FPRG 8.12 Key Assignment Window)
Other group
transmitting
TA Busy Channel
Lockout
FPRG 8.6.15 Talk Around Busy
See
CONTENTS INDEX 284