Kenwood NEXEDGE NX-200 Function Reference page 337

12 FleetSync
12.2 Available Calls
12.2 Available Calls
The following various calls are available by using FleetSync IDs. For transceiver operations and behaviors, refer to the
instructions of each call type.
• PTT ID Communications
• Selective Call
• Individual Call
• Group Call
• Fleet Call
• Supervisor Call
• Broadcast Call
• Status Call
• Short Data Call
• Long Data Call
Note
The type of a selective call is determined by the match pattern of the Fleet and the ID. (Refer to
309.)
Transition for Each Mode
If a user wishes to send or receive a selective call, Status Message or Short Message using FleetSync, the user must
operate the transceiver after selecting the desired mode. Following are the transition diagrams for each mode.
Transmission
SelCall (FleetSync) key
Side 1
or
Right/Home key
*1
,
Side 1
*2
,
Triangle
or
Right/Home key
*1 NX-200/ NX-210/ NX-300/ NX-410/ NX-411
*2 Mobile
FUNC (K)/Ver 4.00
SelCall + Status
(FleetSync) key
Selcall Mode
*1 *2
, Triangle ,
Menu ([ ]) or [*] key
Status Mode
*1
, Triangle
Side 1
or
Right/Home key
Normal Mode
Status
(FleetSync/NXDN) key
Status Mode Selcall Mode
*1
,
Side 1
*2
,
Triangle
or
Right/Home key
Short Message Mode
*2
,
12.4 Making a Selective Call on page
SelCall + SDM SDM
(FleetSync) key
(FleetSync/NXDN)
key
Short Message Mode
Menu ([ ]) or [*] key
*1
, Triangle
Side 1
Menu ([
key
*1 *2
, Triangle ,
Side 1
Menu ([ ]) or [*] key
CONTENTS INDEX
*2
,
]) or [*]
303