Kenwood NEXEDGE NX-200 Function Reference page 582

APPENDIX
Key Operations for Each Mode
Editing a DTMF Code (editing a
list)
Key
Selects a DTMF code by changing the DTMF codes one at a time.
Press
[ ]/ [ ]
Selects a DTMF code by changing from one code to another
Hold
continuously.
Down
Triangle Press
Square Press
Determines all DTMF codes, or a DTMF code if the DTMF code is
Menu ([ ]) Press currently selected.
Deletes one digit, or restores the DTMF Name entry display if no DTMF
Press code is entered.
Back
Hold
Down
Press
Left
Hold
Down
Press
Right/Home
Hold
Down
[0] to [9] Press
[A] to [D] Press
If the * and # key-entry Pattern is enabled:
Press
If the * and # key-entry Pattern is disabled:
[*]
If the * and # key-entry Pattern is enabled:
Hold
Down
If the * and # key-entry Pattern is enabled:
Press
If the * and # key-entry Pattern is disabled:
[#]
Hold If the * and # key-entry Pattern is enabled:
Down
PTT
(microphone) Press
switch
FUNC (K)/Ver 4.00
-
Deletes all digits.
-
-
Aborts the current mode.
-
Enters a DTMF code.
Enters a DTMF code.
Determines a DTMF code if the DTMF code is selected. Or, the
transceiver migrates to DTMF code entry mode, and then pressing
the [*] or [#] key subsequently enters "*" or "#".
Enters "*".
Migrates to the DTMF code entry mode. Then, pressing the [2], [5],
[8] or [0] key to enters "A", "B", "C", or "D" respectively.
Clears one digit, or restores the DTMF Name entry display if no
DTMF code is entered.
Enters "#".
Deletes all digits.
Autodial Programming
Editing a DTMF Code (adding a
list)
Aborts the current mode.
-
-
-
-
Transmits after aborting the current mode.
Editing a DTMF Name (adding a
list)
Selects a character by changing
one character at a time.
Selects a character by changing
from one character to another
continuously.
-
Determines the DTMF Name or
determines the character if a
character is selected.
Deletes one character, or restores
the list selection display if no
character is entered.
Deletes all characters.
Shifts the cursor to the left.
Shifts the cursor to the left
continuously.
Shifts the cursor to the right.
Shifts the cursor to the right
continuously.
Enters characters.
-
Determines the DTMF Name or
determines the character if a
character is selected.
-
Deletes one character, or restores
the list selection display if no
character is entered.
Deletes all characters.
CONTENTS INDEX 548