Kenwood NEXEDGE NX-200 Function Reference page 301

10 ANALOG CONVENTIONAL SYSTEM
10.3 Changing the Decode/ Encode Combination of the QT/DQT (OST)
Operating the Transceiver
 If selecting an OST code from the OST List having List No. 9 or lower:
1
Press and hold one of the
The OST List corresponding to the pressed key is enabled. The
corresponding OST Name appears for 2 sec.
The previous channel name or number appears on the main
display when the OST Name display disappears.
Note
"TONE OFF" can be selected by pressing and holding the [0] key. (Refer to
268.)
 If selecting an OST code from the OST List having List No. 10 or higher:
1
Press and hold the
The transceiver enters OST List Number Entry Mode.
2
Enter the OST List number by using the keypad.
FUNC (K)/Ver 4.00
[1] to [9] keys.
[*] key.
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
Disabling the QT/DQT Decode/ Encode (Tone Off) on page
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
CONTENTS INDEX 267