Kenwood NEXEDGE NX-200 Function Reference page 271

9 NXDN TRUNKING SYSTEM
9.16 Locking the Site to Be Used (Site Lock/ Site Select)
Operating the Transceiver
 Enabling or disabling the Site Lock
1
Press the Site Lock
The " " icon appears, and the site number of the current site
appears on the sub-display and the site name appears on the
main display for 2 sec. In 2 sec, Site Lock is enabled.
2
Press the Site Lock
The " " icon disappears and then Site Lock will be disabled.
Note
• Transceiver operation is identical even if "Site Lock" is selected after entering Menu Mode by pressing the Menu key. (Refer to
Using Menu Mode on page
• The Site Lock can be enabled for the current site only if the transceiver has acquired a control channel.
 Using the Site Select Mode
1
Press and hold the
The transceiver enters Site Select Mode, and then the list will
appear.
FUNC (K)/Ver 4.00
key while Site Lock is disabled.
key while Site Lock is enabled.
23.)
Site Lock key.
In 2 seconds
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
In 2 seconds
Mobile
NX-200/ NX-210/ NX-300/ NX-410/ NX-411
Mobile
CONTENTS INDEX
3.4
237