Kenwood NEXEDGE NX-200 Function Reference page 317

11 LTR TRUNKING SYSTEM
11.1 Using the LTR ID for Basic Communications
Communicating Without Using a Repeater (Talk Around)
Talk Around is the function that allows transceivers to communicate directly without using a repeater.
If the transceiver cannot link to a repeater due to too great distance between the transceiver and the repeater, the
transceiver can directly communicate with the target transceiver using Talk Around.
The transceiver with Talk Around enabled transmits using the transmit frequency and the Encode ID of the Home Repeater
for the selected zone.
By using KPG-111D/ DN, Talk Around can be configured for each Group ID to be enabled or disabled.
The " " icon appears if a Group ID with Talk Around enabled is selected. Talk Around cannot be disabled by pressing a
key of the transceiver such as the Talk Around key.
In a Group ID for which Talk Around is configured to be disabled, Talk Around can be toggled between enabled and
disabled by pressing the Talk Around key. Or, pressing the Menu key causes the transceiver to enter Menu Mode, and
then Talk Around can be toggled between enabled and disabled by selecting "Talk Around". (Refer to
Mode on page 23.)
Note
Availability of the Talk Around key operation can be configured for each zone. (Refer to
Operating the Transceiver
 Using a GID with Talk Around enabled:
1
Select a GID with Talk Around enabled.
The " " icon lights and Talk Around will be enabled.
 Using a GID with Talk Around disabled:
1
Press the Talk Around
The " " icon lights and Talk Around will be enabled.
2
Press the Talk Around
The " " icon disappears and Talk Around will be disabled.
FUNC (K)/Ver 4.00
Transmit
Frequency A
Repeater
Transmit Frequency B
Transceiver 1
Figure 11-3 Talk Around
key.
key.
Transmit
Frequency B
Transceiver 2
Talk Around Key on page
CONTENTS
3.4 Using Menu
284.)
INDEX 283