Cross Shaft Teardown - Toro Diesel Z Master Service Manual

MOWER DECKS
21. Place the shaft assembly in a press and press the
bearing off the shaft (Fig. 951).
22. Place the pinion housing in a vise and remove the
inner and outer bearing races from the housing (Fig.
952).
Note: The inner race and housing must be heated to
remove the races.
7
7-72
Fig 951 IMG-8509
Fig 952 IMG-8514

Cross Shaft Teardown

23. Place the cross shaft in a press with the pinion gear
bearing facing up.
24. Press the pinion gear and bearing off the cross shaft
(Fig. 953).
Fig 953
25. Remove the key from the shaft keyway (Fig. 954).
Fig 954
Z580/Z593/Z595 Diesel Service Manual
IMG-8517
IMG-8519