Checking The Coolant Level - Toro Reelmaster 7000-D Operator's Manual

Coolant Specifications (continued)
• Preferred option: If distilled water is not available, use a pre-mix coolant instead of a
concentrate.
• Minimum requirement: If distilled water and pre-mix coolant are not available, mix
concentrated coolant with clean drinkable water.
Cooling system capacity
Approximately 12.3 L (13 US qt)

Checking the Coolant Level

If the engine has been running, the pressurized, hot coolant can escape, which could
result in minor or moderate injury.
• Do not open the radiator cap when the engine is running.
• Use a rag when opening the radiator cap, and open the cap slowly to allow steam
to escape.
1. Prepare the machine for maintenance.
2. Open the hood, and wait for the engine to
cool..
3. Carefully remove the radiator cap
4. Check the coolant level in the radiator.
Note:
top of the filler neck
5. Check the coolant level in the expansion tank.
Note:
F mark
ULL
6. If the coolant is low, add the specified coolant
to the radiator, expansion tank, or both.
7. Install the radiator cap and the expansion-tank
cap
8. Close and latch the hood.
Maintenance: Cooling System Maintenance
The coolant level is correct if it is to the
of the radiator.
The coolant level is correct if it is to the
of the expansion tank.
.
CAUTION
.
G425390
Page 6–36 3466-706 A