Figure 165: Installing An Fpc - Juniper T640 Hardware Manual

T640 Core Router Hardware Guide
338

Figure 165: Installing an FPC

Gently rest the bottom edge of the FPC on the bottom edge of the slot opening, making
11.
contact a short distance forward of the power connector.
CAUTION: Take care not to bend or otherwise damage the power
connector prongs.
Slowly slide the FPC all the way into the card cage until you feel resistance.
12.
CAUTION: To avoid damaging the FPC, make sure that you keep the
bottom of the FPC flat as you slide it into the slot.
Starting with the ejector handles on the FPC faceplate nearly horizontal, simultaneously
13.
turn both ejector handles clockwise to seat the FPC.
Do not bend or damage prongs
on power connector
Copyright © 2017, Juniper Networks, Inc.