Connecting The Mx204 Router To External Devices And Cables - Juniper MX204 Hardware Manual

Connecting the MX204 Router to External Devices and Cables

IN THIS SECTION
Connecting the Router to a Network for Out-of-Band Management | 103
Connecting the Router to a Console Device | 103
Connecting the Router to External Clocking and Timing Devices | 105
Figure 39 on page 102 shows the front panel of the MX204 router. All the connections to the router are
made through the front panel.
Figure 39: MX204 Front Panel Ports, LEDs and Buttons
1
16
1 Rate-selectable ports
—
2 Management (MGMT) port
—
3 BITS port with LEDs
—
4 USB port
—
5 1PPS and 10MHz GPS input and output ports
—
6 ONLINE LED
—
7 SSD1 LED
—
8 OFFLINE button
—
2 3 4
15 14 13
5 6 7 8
12 11 10 9
9 RESET button
—
10 SSD0 LED
—
11 Alarm (ALM) LED
—
12 OK/FAIL LED
—
13 Time of day (ToD) port with LEDs
—
14 Console (CON) port
—
15 10-Gigabit Ethernet SFP+ ports
—
16 PTP grandmaster clock (GM/PTP) port
—
102