CHAPTER 18
Connecting the Router to External Devices
Connecting ACX2200 Routers to Management Devices
Connecting the Router to a Network for Out-of-Band Management
Copyright © 2017, Juniper Networks, Inc.
Connecting ACX2200 Routers to Management Devices on page 79
Connecting ACX2200 Routers to an External Alarm-Reporting Device on page 81
Connecting ACX2200 Routers to External Clocking Devices on page 82
To connect external devices and cables to the router, you need the following tools:
RJ-45 Ethernet cable and RJ-45 to DB-9 serial port adapter (provided)
Management host, such as a PC, with an Ethernet port (not provided)
Connecting the Router to a Network for Out-of-Band Management on page 79
Connecting the Router to a Management Console or Auxiliary Device on page 80
To connect to the
port on the ACX2200 router:
MGMT
Turn off the power to the management device.
1.
Plug one end of the Ethernet cable into the
2.
(Figure 20 on page 79
shows the connector.
Plug the other end of the cable into the network device.
3.
Figure 20: Ethernet Cable Connector
port on the router.
MGMT
Figure 21 on page 80
shows the port.)
79