Connecting The Mx10003 To The Network; Tools And Parts Required To Connect The Mx10003 Router To External Devices; Connecting The Mx10003 Router To External Devices And Cables - Juniper MX10003 Hardware Manual

Prevention of Electrostatic Discharge Damage | 182

Connecting the MX10003 to the Network

IN THIS SECTION
Tools and Parts Required to Connect the MX10003 Router to External Devices | 100
Connecting the MX10003 Router to External Devices and Cables | 100
Tools and Parts Required to Connect the MX10003 Router to External
Devices
To connect the router to external devices, you need the following tools and parts:
2.5-mm flat-blade (-) screwdriver for the alarm relay contacts
Electrostatic discharge (ESD) grounding wrist strap (provided in the accessory kit)
SEE ALSO
Verifying the MX10003 Router Parts Received | 86
Prevention of Electrostatic Discharge Damage | 182

Connecting the MX10003 Router to External Devices and Cables

IN THIS SECTION
Connecting the Router to a Network for Out-of-Band Management | 101
Connecting the Router to a Console Device | 102
Connecting the Router to External Clocking and Timing Devices | 104
100