Reinstalling The T640 Cable Management System - Juniper T640 Hardware Manual

Reinstalling the T640 Cable Management System

Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
To reinstall the cable management system:
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
1.
the strap to one of the ESD points on the chassis.
Position the cable management system on the studs on the lower front of the chassis.
2.
Insert the nuts through the holes in the cable management system onto the studs on
3.
the chassis.
Using a 3/8-in. nut driver, tighten the nuts securely.
4.
T640 Preventing Electrostatic Discharge Damage on page 506
T640 Chassis Description on page 15
T640 Cooling System Description on page 31
T640 SONET Clock Generators (SCGs) Description on page 27
T640 T Series Control Boards (T-CBs) Description on page 64
T640 Switch Interface Boards (SIBs) Description on page 111
Chapter 19: Installing the T640 Router Without a Mechanical Lift
205