Reinstalling The M320 Cable Management System; Figure 48: Reinstalling A Front Fan Tray - Juniper M320 Hardware Manual

Figure 48: Reinstalling a Front Fan Tray

Reinstalling the M320 Cable Management System

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
To reinstall the cable management system:
Position the cable management system on the studs on the lower front of the chassis.
1.
Insert the nuts through the holes in the cable management system onto the studs on
2.
the chassis.
Using a 3/8-in. nut driver, tighten the nuts securely.
3.
Taking the M320 Host Subsystem Offline on page 160
Preventing Electrostatic Discharge Damage to an M320 Router on page 214
Removing the M320 SIBs on page 73
Removing the M320 CBs on page 74
M320 Cooling System Description on page 37
Chapter 7: Installing the M320 Router Without a Mechanical Lift
87