Reinstalling The T1600 Components In The Chassis - Juniper T1600 Hardware Manual

Related
Documentation

Reinstalling the T1600 Components in the Chassis

Copyright © 2010, Juniper Networks, Inc.
Figure 72: Installing the Router in the Rack
NOTE: This illustration depicts the router being installed in a four-post rack.
For an illustration of the mounting hardware required for an open-frame rack,
see Installing the T1600 Mounting Hardware for an Open-Frame Rack .
Overview of Installing the T1600 Router on page 73
Overview of Installing a T1600 Router Without a Mechanical Lift on page 101
T1600 Chassis Lifting Guidelines on page 316
Reinstalling the T1600 Components in the Chassis on page 115
Reinstalling the T1600 Rear Fan Tray on page 116
1.
Reinstalling the T1600 SCGs on page 117
2.
3. Reinstalling the T1600 Control Boards on page 117
Reinstalling the T1600 SIBs on page 118
4.
Reinstalling the T1600 Power Supplies on page 119
5.
Chapter 10: Installing the T1600 Router Without a Mechanical Lift
115