Date And Time Properties - Cisco OL-4015-08 User Manual

Chapter 23 Router Properties
Date/Time
Router Time Source
Change Settings

Date and Time Properties

Synchronize with my local PC clock
Synchronize
OL-4015-08
You can see the router's date and time settings on the right side of the SDM status
bar. The time and date settings in this part of the Clock Properties window is not
updated.
This field can contain the following values:
NTP. The router receives time information from an
•
User Configuration. The time and date values are set manually, via SDM or
•
the CLI.
No time source. The router has not been configured with time or date settings.
•
Click to change the date and time settings on the router.
Use this window to make router date and time settings. You can have SDM
synchronize settings with the PC, or you can make settings manually.
Check to set up SDM to synchronize router date and time settings with the date
and time settings on the PC.
Click to have SDM perform a synchronization. SDM adjusts date and time
settings in this way only when you click Synchronize; it does not automatically
re synchronize with the PC during subsequent sessions. This button is disabled if
you have not checked Synchronize with my local PC clock.
Cisco Router and Security Device Manager Version 2.2 User's Guide
Date and Time: Clock Properties
NTP server.
23-3