Transform Set - Cisco OL-4015-08 User Manual

Chapter 8 Site-to-Site VPN
To add or edit an IKE policy:
To accept the policy list:

Transform Set

Select Transform Set
Details of the Selected Transform Set
OL-4015-08
If you want to add an IKE policy that is not included in this list, click Add and
create the policy in the window displayed. Edit an existing policy by selecting it
and clicking Edit. SDM Default policies are read only, and cannot be edited.
To accept the IKE policy list and continue, click Next.
This window lists the SDM-default transform sets and the additional transform
sets that have been configured on this router. These transform sets will be
available for use by the
combination of security protocols and algorithms. During the IPSec security
association negotiation, the peers agree to use a particular transform set for
protecting a particular data flow. A
protocol with its corresponding algorithms.
You can select only one transform set in this window, but you can associate
additional transform sets to the VPN or DMVPN connection using the VPN or
DMVPN Edit tabs.
Select the transform set that you want to use from this list.
This area supplies details about the selected transform set. Not all types of
encryption, authentication, and compression have to be configured; therefore,
some columns may not contain values.
To learn the possible values each column may contain, click
Transform Set.
Name
The name given to this transform set.
Cisco Router and Security Device Manager Version 2.2 User's Guide
VPN or DMVPN. A transform set
transform
Create Site to Site VPN
represents a certain
describes a particular security
Add or Edit
8-43