Cisco OL-4015-08 User Manual page 524

Chapter 25 Port-to-Application Mapping
Port-to-Application Mappings
numbers separated by commas, or port number ranges indicated with a dash. For
example, you might enter three noncontiguous port numbers as 310, 313, 318, or
you might enter the range 415–419.
If the router is not running a Cisco IOS image that allows you to specify whether
this port map entry applies to TCP or to UDP traffic, you can enter a single port
number.
Host of Service Field
Specify the IP address of the host to which this port mapping is to apply. If you
need the same mapping for another host, create a separate PAM entry for that host.
Cisco Router and Security Device Manager Version 2.2 User's Guide
25-22
OL-4015-08