Cisco OL-4015-08 User Manual page 253

Chapter 9 Easy VPN Remote
User Authentication
OL-4015-08
Enter the IPSec groupname in the Group Name field and the new IKE key value
in the New Key field. Reenter the new key for confirmation in the Confirm Key
field. If the values in the New Key and Confirm Key field are not the same, SDM
prompts you to reenter the key values.
The Current Key field displays asterisks (*) if there is a current IKE key value.
This field is blank if no key has been configured.
If the Easy VPN server or concentrator has been configured to use XAuth, it
requires a username and password whenever the router establishes the connection,
including when you deliver the configuration to the router, and when you
disconnect and reconnect the tunnel. Find out whether XAuth is used, and obtain
the required username and password.
If the server allows passwords to be saved, you can eliminate the need to enter the
username and password each time the Easy VPN tunnel is established. The
information is saved in the router configuration file and used each time the tunnel
is established.
Choose one of these ways to enter the XAuth username and password:
Manually in a web browser window
•
The web browser option appears only if supported by the Cisco IOS
Note
image on your router.
Manually from the command line or SDM
•
Automatically by saving the username and password on the router
•
The Easy VPN server may use
allows passwords to be saved, you can eliminate the need to enter the
username and password each time the Easy VPN tunnel is established by this
option. Enter the username and password provided by the Easy VPN server
administrator, and then reenter the password to confirm its accuracy.
The Current Password field displays asterisks (*) if there is a current
Note
password value. This field is blank if no password has been configured.
Cisco Router and Security Device Manager Version 2.2 User's Guide
XAuth to authenticate the router. If the server
Edit Easy VPN Remote
9-99