General Group Information - Cisco OL-4015-08 User Manual

Chapter 10 Easy VPN Server
Idle Timer

General Group Information

Please Enter a Name for This Group
Preshared Key
Note
Pool Information
OL-4015-08
Disconnecting idle VPN tunnels can help the Easy VPN Server run more
efficiently by reclaiming unused resources.
Click the Configure Idle Timer check box and enter a value for the maximum
time that a VPN tunnel can remain idle before being disconnected. Enter hours in
the left field, minutes in the middle field, and seconds in the right field. The
minimum time allowed is 1 minute.
This window allows you to configure, edit and clone group polices.
Enter the group name in the field provided. If this group policy is being edited,
this field is disabled. If you are cloning a group policy, you must enter a new value
in this field.
Enter the preshared key in the fields provided.
The Current key field cannot be changed.
You do not have to enter a preshared key if you are using digital certificates for
group authentication. Digital certificates are also used for user authentication.
Specifies a local pool of IP addresses that are used to allocate IP addresses to
clients.
Create a New Pool
Enter the range of IP addresses for the local IP address pool in the IP Address
Range field.
Cisco Router and Security Device Manager Version 2.2 User's Guide
Create an Easy VPN Server
10-111