Cisco OL-4015-08 User Manual page 627

Chapter 33 File Menu Commands
Enter the command erase flash:, and confirm. The router's IOS image,
Step 6
configuration file, the SDM.tar file, and the SDM.shtml file are removed from
non-volatile RAM (NVRAM).
Use the tftpcopy command to first copy the IOS image and then SDM.tar from
Step 7
the TFTP server to the router:
copy tftp://tftp-server-address/filename flash:
Example:
copy tftp://10.10.10.3/ios_image_name flash:
! Replace ios_image_name with actual name of IOS image
copy tftp://10.10.10.3/SDM.tar flash:
Start your web browser, and reconnect to SDM, using the same IP address you
Step 8
used when you started the SDM session.
Now that an erase flash: has been performed on the router, you will be able to
execute the squeeze flash command when necessary.
OL-4015-08
Cisco Router and Security Device Manager Version 2.2 User's Guide
Unable to perform 'squeeze flash'
33-7