Save Running Config to PC
Deliver Configuration to Router
Save Running Config to Router's Startup Config
OL-4015-08
File Menu Commands
The following options are available from the Cisco Router and Security Device
Manager (SDM) File menu.
Saves the router's running configuration file to a text file on the PC.
This window lets you deliver to the router any configuration changes that you
have made using SDM. Note that any changes to the configuration that you made
using SDM will not affect the router until you deliver the configuration.
Check this check box to cause SDM to save the configuration shown in the
window to both the router running configuration file and the startup file. The
running configuration file is temporary—it is erased when the router is rebooted.
Saving the configuration to the router startup configuration causes the
configuration changes to be retained after a reboot.
If SDM is being used to configure a Cisco 7000 router, the check box Save
running config. to router's startup config. will be disabled if there are boot
network or boot host commands present with service config commands in the
running configuration.
Cisco Router and Security Device Manager Version 2.2 User's Guide
C H A P T E R
33
33-1