Vpn Status - Cisco OL-4015-08 User Manual

VPN Status

Note
Chart Area
Note
VPN Status
Select a Category
Cisco Router and Security Device Manager Version 2.2 User's Guide
32-8
Real-time data every 10 sec. This option will continue polling the router for
•
a maximum of two hours, resulting in approximately 120 data points.
10 minutes of data polled every 10 sec.
•
60 minutes of data, polled every 1 minute.
•
12 hours of data, polled every 10 minutes.
•
The last three options will retrieve a maximum of 60 data points. After 60 data
points have been retrieved, SDM will continue to poll data, replacing the oldest
data points with the newest ones.
Show Table/Hide Table
Click this button to show or hide the performance charts.
Reset button
Click this button to reset the interface statistic counts to zero.
This area shows the charts and simple numerical values for the data specified.
The last three options will retrieve a maximum of 30 data points. After 30 data
points have been retrieved, SDM will continue to poll data, replacing the oldest
data points with the newest ones.
This screen displays statistics about the
router.
From this pull-down field, select the type of VPN for which you want to see
statistics. The statistics corresponding to the selection made in this field will
appear in the field below. You can select one of the following VPN categories:
Chapter 32 Viewing Router Information
VPN connections that are active on the
OL-4015-08