Cisco OL-4015-08 User Manual page 210

Edit Site-to-Site VPN
Site-to-Site VPN Connections
Cisco Router and Security Device Manager Version 2.2 User's Guide
8-56
Use this window to create and manage VPN connections to remote systems. You
can create, edit, and delete VPN connections, and reset existing connections. You
can also use this window to configure your router as an Easy VPN client with
connections to one or more Easy VPN servers or concentrators.
Click the link for the part of the window for which you want help:
VPN connections, sometimes referred to as tunnels, are created and managed
from the VPN Connections box. A VPN connection links a router interface to one
or more peers specified by a crypto map defined in an IP Security (IPSec)
policy.You can view, add, edit, and delete the VPN connections in this list.
Status column
The status of the connection, which is indicated by the following icons:
The connection is up.
The connection is down.
The connection is being established.
Interface
The router interface that is connected to the remote peers in this VPN connection.
An interface can be associated with only one IPSec policy. The same interface will
appear on multiple lines if there is more than one
policy used in this connection.
Description
A short description of this connection.
IPSec Policy
The name of the IPSec policy used in this VPN connection. The IPSec policy
specifies how data is encrypted, which data will be encrypted, and where data will
be sent. For more information, click
Policies.
Chapter 8
crypto map
More about VPN Connections and IPSec
Site-to-Site VPN
defined for the IPSec
OL-4015-08