Add Or Edit Client Update Entry; Summary - Cisco OL-4015-08 User Manual

Chapter 10 Easy VPN Server

Add or Edit Client Update Entry

Client Type
URL
Revisions

Summary

OL-4015-08
This window allows you to configure a new client update entry.
Enter a client type or choose one from the drop-down menu. Client type names
are case sensitive.
For software clients, the client type is usually the operating system, for example,
Windows. For hardware clients, the client type is usually the model number, for
example, vpn3002.
If you are editing the client update entry, the client type is read-only.
Enter the URL that leads to the latest software or firmware revision, for example,
http://www.cisco.com/client/updates.
Enter the revision number of the latest update. You can enter multiple revision
numbers by separating them with commas, for example, 4.3,4.4,4.5. Do not use
any spaces.
This window shows you the Easy VPN Server configuration that you have created,
and it allows you to save the configuration. You can review the configuration in
this window and click the Back button to change any items.
Clicking the Finish button writes the information to the router running
configuration. If the tunnel has been configured to operate in Auto mode, the
router also attempts to contact the VPN concentrator or server.
If you want to change the Easy VPN Server configuration at a later time, you can
make the changes in the
To save this configuration to the router running configuration and leave this
wizard, click Finish. Changes will take effect immediately.
Cisco Router and Security Device Manager Version 2.2 User's Guide
Add or Edit Easy VPN Server
Create an Easy VPN Server
panel.
10-121