Enable Or Edit Ips On An Interface - Cisco OL-4015-08 User Manual

Chapter 19 Intrusion Prevention System
Enable Button
Edit Button
Disable Button
Disable All Button
Interface Name
IP
OL-4015-08
Click this button to enable
the traffic directions to which IPS is to be applied, and the ACLs to use to define
the type of traffic to examine.
information.
Click this button to edit the IPS characteristics applied to the selected interface.
Click this button to disable IPS on the selected interface. A context menu shows
you the traffic directions on which IPS has been applied and you can select the
direction on which you want to disable IPS. If you disable IPS on an interface on
which it has been applied, SDM dissociates any IPS rules from the interface that
they were applied to.
Click this button to disable IPS on all interfaces on which it has been enabled. If
you disable IPS on an interface on which it has been applied, SDM dissociates any
IPS rules from the interfaces that they were applied to.
The name of the interface, for example Serial0/0, or FE0/1.
IP Address
This column can contain the following types of IP addresses:
The configured IP address of the interface.
•
DHCP Client—The interface receives an IP address from a Dynamic Host
•
Configuration Protocol (DHCP) server.
Negotiated—The interface receives an IP address via negotiation with the
•
remote device.
Cisco Router and Security Device Manager Version 2.2 User's Guide
IPS on the selected interface. You are able to specify

Enable or Edit IPS on an Interface

IPS Rules
has more
19-35