Cisco OL-4015-08 User Manual page 510

Rules Windows
Rule Entry List
Clone
Interface Association
Note
Cisco Router and Security Device Manager Version 2.2 User's Guide
24-8
This list shows the entries that make up the rule. You can add, edit, and delete
entries. You can also reorder them to change the order in which they are evaluated.
Observe the following guidelines when creating rule entries:
There must be at least one permit statement in the list; otherwise, all traffic
•
will be denied.
A permit all or deny all entry in the list must be the last entry.
•
Standard entries and extended entries cannot be mixed in the same rule.
•
• No duplicate entries can exist in the same rule.
Click this button to use the selected entry as a template for a new entry. This
feature can save you time, and help reduce errors. For example, if you want to
create a number of extended rule entries with the same source and destination, but
different protocols or ports, you could create the first one using the Add button.
After creating the first entry, you could copy it using Clone, and change the
protocol field or port field to create a new entry.
Click the Associate button to apply the rule to an interface.
The Associate button is enabled only if you are adding a rule from the Access
Rules window.
Chapter 24 ACL Editor
OL-4015-08