Details Window; Summary Of The Configuration - Cisco OL-4015-08 User Manual

Create NAC Tab
Interface
FastEthernet0/0
FastEthernet0/0

Details Window

Summary of the configuration

Cisco Router and Security Device Manager Version 2.2 User's Guide
22-30
Service
NTP
RADIUS Server
This window displays the entries that SDM will add to ACLs to allow services
needed for the NAC validation process. The window might contain an entry like
the following:
permit tcp host 10.77.158.84 eq www host 10.77.158.84 gt 1024
This window summarizes the information you entered, and allows you to review
it in a single window. You can use the back button to return to any wizard screen
to change information. Click Finish to deliver the configuration to the router.
Here is an example of a NAC configuration summary:
RADIUS Source Interface: Ethernet 0/0
RADIUS Server(s):
10.77.158.54
Interface: FastEthernet 0/0
Admission Name: SDM_ADM_Policy_1
Exception List
Type
IP Address
IP Address
In this example, RADIUS information from 10.77.158.54 enters via Ethernet 0/0.
NAC is enabled on FastEthernet 0/0, and the NAC policy that the wizard applied
is SDM_ADM_Policy_1. Two hosts have been named in the exception list, and
their access to the network is controlled by the exception policy NACLess.
Chapter 22
ACL
101 (INBOUND)
Address/Device
10.10.10.1
10.10.10.1
Network Admission Control
Action
[ ] Modify
[ ] Modify
Policy
NACLess
NACLess
OL-4015-08