Cisco OL-4015-08 User Manual page 268

Create an Easy VPN Server
Split DNS
Note
What Do You Want to Do?
If you want to:
Enable split tunneling.
Add a protected subnet.
Delete a protected subnet.
Choose the ACL to be used for split tunneling.
Use your network's DNS server to resolve certain
domain names.
Cisco Router and Security Device Manager Version 2.2 User's Guide
10-114
Enter the Protected Subnets
Add or remove the subnets for which the packets are tunneled from the VPN
clients.
Choose the Split Tunneling ACL
Choose the ACL to use for split tunneling.
Enter the Internet domain names that should be resolved by your network's DNS
server. The following restrictions apply:
A maximum of 10 entries is allowed.
•
• Entries must be separated with a comma.
Do not use spaces anywhere in the list of entries.
•
Duplicate entries or entries with invalid formats are not accepted.
•
This feature appears only if supported by your Cisco server's IOS release.
Do this:
Check the Enable Split Tunneling option.
Choose Enter the Protected Subnets, and then
click Add.
Choose Enter the Protected Subnets, and then
click Delete.
Choose Choose the Split Tunneling ACL, and
choose the ACL from the available options.
Check the Enable Split Tunneling option and
enter the domain names in the field provided.
You must also set up subnets or choose an ACL.
Chapter 10 Easy VPN Server
OL-4015-08