Cisco OL-4015-08 User Manual page 116

Connection: Serial Interface, PPP Encapsulation
Authentication
Clock Settings
Dynamic DNS
Note
Cisco Router and Security Device Manager Version 2.2 User's Guide
4-40
Click this button if you need to enter
In most cases, clock settings should not be changed from the default values. If you
know that your requirements are different from the defaults, click this button and
make new clock settings in the window displayed.
The clock settings button will only appear if you are configuring a T1 or E1 serial
connection.
Enable dynamic DNS if you want to automatically update your DNS servers
whenever the WAN interface's IP address changes.
This feature appears only if supported by your Cisco server's IOS.
To choose a dynamic DNS method to use, do one of the following:
Enter the name of an existing dynamic DNS method.
•
Enter the name in the Dynamic DNS Method field exactly as it appears in
the list in Configure > Additional Tasks > Dynamic DNS Methods.
Choose an existing dynamic DNS method from a list.
•
Click the drop-down menu and choose to use an existing method. A window
with a list of existing dynamic DNS methods will open. This menu choice is
available only if there are existing dynamic DNS methods.
Create a new dynamic DNS method.
•
Click the drop-down menu and choose to create a new dynamic DNS method.
To clear an associated dynamic DNS method from the interface, choose None
from the drop-down menu.
Chapter 4 Edit Interface/Connection
CHAP or PAP authentication information.
OL-4015-08