Edit Inspection Rule - Cisco OL-4015-08 User Manual

Global Timeouts and Thresholds

Edit Inspection Rule

Alert Field
Audit Field
Timeout Field
Other Options
Cisco Router and Security Device Manager Version 2.2 User's Guide
7-30
Use this window to specify custom inspection rule settings for an application.
Settings made here and applied to the router's configuration override the global
settings.
Click the Global Settings button in the Application Security window to display
the global settings for the parameters that you can set in this window. See
Timeouts and Thresholds
Choose one of the following values:
default—Use the global setting for alerts.
•
on—Generate an alert when traffic of this type is encountered.
•
off—Do not generate an alert when traffic of this type is encountered.
•
Choose one of the following values:
default—Use the global setting for audit trails.
•
on—Generate an audit trail when traffic of this type is encountered.
•
off—Do not generate an audit trail when traffic of this type is encountered.
•
Enter the number of seconds that a session for this application should be managed
after no activity has been detected. The timeout value that you enter sets the TCP
Idle Timeout value if this is a TCP application, or the UDP timeout value if this
is a UDP application.
Certain applications can have additional options set. Depending on the
application, you may see the options described next.
for more information.
Chapter 7 Application Security
Global
OL-4015-08