Running Config; Show Commands; Sdm Default Rules - Cisco OL-4015-08 User Manual

Running Config

Running Config

Show Commands

SDM Default Rules

Cisco Router and Security Device Manager Version 2.2 User's Guide
35-2
Displays the router's running configuration.
Displays the Show Commands dialog box, which lets you issue Cisco IOS show
commands to the router and view the output. The Show Commands dialog box can
display the output from the following show commands:
show flash—Shows the contents of the router Flash memory.
•
• show startup-config—Shows the router startup configuration file.
show access-lists—Shows all of the Access Control Lists (ACLs) commands
•
currently configured on the router.
show diag—Shows information about the hardware installed in the router.
•
show interfaces—Shows information about the configuration of each
•
interface and about the packets transferred over the interface.
show protocols—Shows information about the network protocols configured
•
on each interface.
show version—Shows information about the version of Cisco IOS software
•
running on the router.
The SDM Default Rules screen displays a list of all of the default rules configured
by SDM. The screen is organized with a tree on the left side of the screen
displaying options for Access Rules, Firewall, VPN - IKE Policy, and
VPN - Transform Sets. To view the default rules for these options, click the option
in the tree, and the default rules for that option are displayed on the right. For more
information about the rules, see the option descriptions that follow.
Chapter 35 View Menu Commands
OL-4015-08