Dhcp Options - Cisco OL-4015-08 User Manual

Cisco router and security device manager user's guide
Table of Contents

Advertisement

Chapter 2
LAN Wizard

DHCP Options

DNS Server 1
DNS Server 2
Domain Name
WINS Server 1
WINS Server 2
OL-4015-08
Use this window to configure DHCP options that will be sent to hosts on the LAN
that are requesting IP addresses from the router. These are not options for the
router that you are configuring; these are parameters that will be sent to the
requesting hosts on the LAN. To set these properties for the router, click
Additional Tasks on the SDM category bar, click DHCP, and configure these
settings in the DHCP Pools window.
The DNS server is typically a server that maps a known device name with its IP
address. If you have DNS server configured for your network, enter the IP address
for that device here.
If there is an additional DNS server on the network, you can enter the IP address
for that server in this field.
The DHCP server that you are configuring on this router will provide services to
other devices within this domain. Enter the name of the domain.
Some clients may require Windows Internet Naming Service (WINS) to connect
to devices on the Internet. If there is a WINS server on the network, enter the IP
address for the server in this field.
If there is an additional WINS server on the network, enter the IP address for the
server in this field.
Cisco Router and Security Device Manager Version 2.2 User's Guide
DHCP Options
2-5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sdm 2.2

Table of Contents