VPN Status
Update button
Disconnect button
IKE SAs
Cisco Router and Security Device Manager Version 2.2 User's Guide
32-12
Public IP address
•
Assigned IP address
•
Encrypted Packets
•
Decrypted Packets
•
Dropped Outbound Packets
•
Dropped Inbound Packets
•
Status
•
Click this button to display the most current data from the router.
Choose a row in the table and click Disconnect to drop the connection with
•
the client.
This group displays the following statistics about each active IKE security
association configured on the router:
Source IP column
•
The IP address of the peer originating the IKE SA.
Destination IP column
•
The IP address of the remote IKE peer.
State column
•
Describes the current state of IKE negotiations. The following states are
possible:
MM_NO_STATE—The Internet Security Association and Key
–
Management Protocol (ISAKMP) SA has been created but nothing else
has happened yet.
MM_SA_SETUP—The peers have agreed on parameters for the
–
ISAKMP SA.
Chapter 32
Viewing Router Information
OL-4015-08