Cisco OL-4015-08 User Manual page 71

Chapter 3 Create Connection Wizards
How Do I View Activity on My WAN Interface?
Step 1
Step 2
Step 3
Step 4
Step 5
How Do I Configure NAT on a WAN Interface?
Step 1
Step 2
Step 3
Step 4
Step 5
OL-4015-08
You can view activity on a
Monitor screens can display statistics about the WAN interface, including the
number of packets and bytes that have been sent or received by the interface, and
the number of send or receive errors that have occurred. To display statistics about
a WAN interface:
From the toolbar, click Monitor.
From the left frame, click Interface Status.
In the Select an Interface field, select the WAN interface for which you want to
view statistics.
Select the data item(s) you want to view by checking the associated check box(es).
You can view up to four statistics at a time.
Click Show Details to see statistics for all selected data items.
The Interface Details screen appears, displaying the statistics you selected. The
screen defaults to showing real-time data, for which it polls the router every
10 seconds. If the interface is up and there is data transmitting across it, you
should see an increase in the number of packets and bytes transferred across the
interface.
Click Configure on the SDM toolbar.
Click NAT in the left frame.
In the NAT window, click Designate NAT interfaces.
Find the interface for which you want to configure NAT.
Check inside(trusted) next to the interface to designate the interface as an inside,
or trusted interface. An inside designation is typically used to designate an
interface serving a LAN whose resources. must be protected. Check
outside(untrusted) to designate it as an outside interface. Outside interfaces
typically connect to an untrusted network. Click OK.
Cisco Router and Security Device Manager Version 2.2 User's Guide
WAN interface by using the Monitor feature in SDM.
How Do I...
3-27