Cisco OL-4015-08 User Manual page 499

Chapter 23 Router Properties
Name
Host IP
Mask
Identifier
MAC Address
Type
Client Name (Optional)
OL-4015-08
Enter the name you want for the DHCP binding. If you are editing the DHCP
binding, the name field is read-only.
Enter the IP address you want to bind to the client. The address should be from
the DHCP pool available to the client. Do not enter an address in use by another
DHCP binding.
Enter the mask used for the host IP address.
From the drop-down menu, choose a method for identifying the client with a MAC
address.
Enter the MAC address of the client. Do not enter an address in use by another
DHCP binding.
If you chose Hardware Address from the Identifier drop-down menu, choose
Ethernet or IEEE802 to set the MAC address type of the client.
Enter a name to identify the client. The name should be a hostname only, not a
domain-style name. For example, router is an acceptable name, but
router.cisco.com is not.
Cisco Router and Security Device Manager Version 2.2 User's Guide
DHCP Configuration
23-25