New Folder; Exit; Unable To Perform 'Squeeze Flash - Cisco OL-4015-08 User Manual

Chapter 33 File Menu Commands

New Folder

Save SDF to PC

Exit

Unable to perform 'squeeze flash'

Step 1
OL-4015-08
This window allows you to name and create a new folder in the directory system
on your Cisco router flash memory and on USB flash devices connected to that
router.
Enter the name of the new folder in the Folder Name field. The path to the location
of the new folder is displayed above the Folder Name field.
If you are working in IPS, you can save the signature definition file (SDF) that
you are working on to your PC. Navigate to the directory in which you want to
save the file, and click Save.
Exits Cisco Router and Security Device Manager.
This window appears when your router is unable to perform a squeeze flash
operation because an erase flash: operation has never been performed on the
router. This help topic explains how to download the files you need before
performing the erase flash: operation, how to execute erase flash:, and how to
load files back onto the router and reconnect to SDM afterward.
Executing the erase flash: command will remove SDM and the Cisco IOS image
from the router's Flash, Flash
router. You should print the contents of this help topic so that you can use the
instructions to obtain a Cisco IOS image and SDM.tar from Cisco.com, and install
them on the router.
Ensure that the router will not lose power. If the router loses power after an
erase flash: operation, there will be no Cisco IOS image in memory.
Cisco Router and Security Device Manager Version 2.2 User's Guide
memory, and you will lose your connection to the
Save SDF to PC
33-5