Add Or Edit Ip Static Route - Cisco OL-4015-08 User Manual

Chapter 17 Routing
Routing Protocol Configuration Parameters
RIP RIP Version, Network, Passive Interface
OSPF Process ID
EIGRP Autonomous System Number
What Do You Want To Do?
If you want to:
Configure an RIP route.
Configure an OSPF route.
Configure an EIGRP route.

Add or Edit IP Static Route

Destination Network
OL-4015-08
Item Value
This column contains the text "Enabled," and configuration values when a routing
type has been configured. It contains the text "Disabled" when a routing protocol
has not been configured.
Do this:
Select the RIP tab and click Edit.
Then, configure the route in the RIP
Dynamic Route window.
Select the OSPF tab and click Edit.
Then, configure the route in the
displayed window.
Select the EIGRP tab and click Edit.
Then, configure the route in the
displayed window.
Use this window to add or edit a static route.
Enter the destination network address information in these fields.
Cisco Router and Security Device Manager Version 2.2 User's Guide
Add or Edit IP Static Route
17-3