Cisco OL-4015-08 User Manual page 134

Advanced Firewall
What Do You Want to Do?
If you want to:
Have SDM create a firewall for me.
You might want to select this option if you
do not want to configure a DMZ network, or
if there is only one outside interface.
Cisco Router and Security Device Manager Version 2.2 User's Guide
5-2
Click this if you want SDM to lead you through the steps of configuring a firewall.
You have the option to create a
The use case scenario shown when you select this option shows you a typical
configuration for an Internet of firewall.
DMZ network, and to specify an
Do this:
Click Basic Firewall. Then, click Launch the Selected
Task.
SDM asks you to identify the interfaces on your router,
and then it uses SDM default access rules and inspection
rules to create the firewall.
Chapter 5 Create Firewall
inspection rule.
OL-4015-08