Enabling Agents In Resource Database (Ibm Lotus Notes/Domino Version 8.5.X); Figure 11: Configuring The Run-Time Of The Scheduled Synchronizer Agent - Cisco TELEPRESENCE MANAGEMENT SUITE EXTENSION - QUICK GUIDE FOR IBM LOTUS NOTES V11.3.1 Installation And Getting Started Manual

agents should run — the server on which the database is created. The database and agents must
be on the same server. Close the agent dialog.
6. Double-click Scheduled Synchronizer. Make sure On schedule is selected. In the drop-down
list to the right of Schedule... select More than once a day.

Figure 11: Configuring the run-time of the Scheduled Synchronizer agent

7. Click the Schedule... button to open the Agent Schedule window. Set the interval to 0 hours and
15 minutes, and verify that the Run on drop-down list is pointing to the correct server. Click OK.
8. Save and close the Scheduled Synchronizer Agent.
9. Close the database and Domino Designer.
Enabling agents in Resource Database (IBM Lotus
Notes/Domino version 8.5.x)
1. Start Lotus Domino Designer and open the Resource Reservations Database that you created
earlier (normally called "Video Conference Resources") by going to File > Application > Open...,
selecting the server where the database was created, and then selecting the database from the
list.
2. From the Applications pane, expand the Code item list to the left.
3. Double-click on Agents.
4. The main frame lists all the agents in the database. Approximately eight (depending on the
Domino version) of the agents have yellow icons next to them, marking them as disabled.
Cisco TMS Extension for IBM Lotus Notes – Installation and getting started guide
Installation
Page 18 of 45