Chapter 8
Site-to-Site VPN
Step 6
Step 7
How Do I Edit an Existing VPN Tunnel?
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
OL-4015-08
Do not apply the mirror configuration to the peer device without
Caution
editing! This configuration is a template that requires additional
manual configuration. Use it only as a starting point to build the
configuration for the VPN peer.
After saving the file, use a text editor to make any needed changes to the template
configuration. These are some commands that may need editing:
The peer IP address command(s)
•
The transform policy command(s)
•
The crypto map IP address command(s)
•
The ACL command(s)
•
The interface ip address command(s)
•
After you have finished editing the peer configuration file, deliver it to the peer
router using a TFTP server.
To edit an existing
VPN
From the left frame, select VPN.
Select Site-to-Site VPN. in the VPN tree, and then click the Edit tab.
Click the connection that you want to edit.
Click Add.
Select Static crypto maps to <policy name>
In the Add static crypto maps window, you can add more crypto maps to the VPN
connection.
Cisco Router and Security Device Manager Version 2.2 User's Guide
tunnel:
How Do I...
8-71