Cisco OL-4015-08 User Manual page 400

Network Address Translation Rules
Direction
Translate from Interface
Note
Cisco Router and Security Device Manager Version 2.2 User's Guide
18-18
This help topic describes how to use the Add Address Translation Rule fields
when From inside to outside is selected.
From inside to outside
Select this option if you want to translate private addresses on the LAN to legal
addresses on the Internet or on your organization's intranet. You may want to
select this option if you use private addresses on your LAN that are not globally
unique on the Internet.
This area shows the interfaces from which packets needing address translation
may arrive. It provides fields for you to specify the IP address of a single host, or
a network address and subnet mask that represent the hosts on a network.
Inside Interface(s)
If you chose From inside to outside for Direction, this area lists the designated
inside interfaces.
If this area contains no interface names, close the Add Address Translation Rule
window, click Designate NAT interfaces in the NAT window, and designate the
router interfaces as inside or outside. Then return to this window and configure
the NAT rule.
IP Address
Do one of the following:
If you want to create a one-to-one static mapping between the address of a
•
single host and a translated address, known as the
the IP address for that host. Do not enter a subnet mask in the Network Mask
field.
If you want to create n-to-n mappings between the private addresses in a
•
subnet to corresponding inside global addresses, enter any valid address from
the subnet whose addresses you want translated, and enter a network mask in
the next field.
Chapter 18 Network Address Translation
inside global address, enter
OL-4015-08