Router Access; User Accounts: Configure User Accounts For Router Access - Cisco OL-4015-08 User Manual

Router Access

Router Access

User Accounts: Configure User Accounts for Router Access

User Name
Password
Note
Privilege Level
View Name
Note
Cisco Router and Security Device Manager Version 2.2 User's Guide
23-10
This window explains which features are included in Router Access.
This window allows you to define accounts and passwords that will enable users
to authenticate themselves when logging into the router via
Telnet, PPP, or other means.
A user account name.
The user account password, displayed as asterisks (*).
The user password is not the same as the enable secret password configured in the
Device Properties—Password tab. The user password will enable the specified
user to log on to the router and enter a limited set of commands.
The privilege level for the user.
If a CLI view has been associated with the user account, the view name appears
in this column. Views define the user's access to SDM based on the user's role.
Click Associate a View with the user
If SDM is launched with a user-defined view, or with an altered SDM-defined
view, SDM operates in Monitor mode, and the user has read-only privileges. The
SDM features available to be monitored depend on the commands present in the
view. Not all features may be available for monitoring by the user.
Chapter 23
for more information.
Router Properties
HTTP, HTTPS,
OL-4015-08