Configuration Summary Screen; Sdm And Cisco Ios Autosecure - Cisco OL-4015-08 User Manual

Chapter 16 Security Audit

Configuration Summary Screen

SDM and Cisco IOS AutoSecure

AutoSecure Features Implemented in SDM
OL-4015-08
Configure authentication and authorization for VTY lines
•
The local database will be used for both authentication and authorization.
Configure authentication for a console line
•
The local database will be used for authentication.
Modify HTTP authentication to use the local database
•
This screen displays a list of all the configuration changes that will be delivered
to the router configuration, based on the security problems that you selected to fix
in the Report Card screen.
AutoSecure is a Cisco IOS feature that, like SDM, lets you more easily configure
security features on your router, so that your network is better protected. SDM
implements almost all of the configurations that AutoSecure affords.
The following AutoSecure features are implemented in this version of SDM. For
an explanation of these services and features, click the links below:
Disable SNMP
•
Disable Finger Service
•
Disable PAD Service
•
Disable TCP Small Servers Service
•
Disable IP BOOTP Server Service
•
Disable IP Identification Service
•
• Disable CDP
Disable IP Source Route
•
Disable IP Redirects
•
Cisco Router and Security Device Manager Version 2.2 User's Guide
Configuration Summary Screen
16-25